Technical features
FIPROSTRIP 299 finds application in the removal of powder coatings from piece holder frames, hooks and pieces with paint defects. Use on ferrous material and steel. Do not apply on aluminum and alloys and galvanized.
Usage and Applications
Use the product as it is, by immersion, at a temperature of 55-70 ° C. The time depends on the temperature and the quantity of paint to be removed.
Physical-Chemical Data
Parametro | Valore |
|---|---|
Appearance | Colorless liquid |
Smell | Characteristic |
pH | ~12 |
Control of bathing
The bath must be checked periodically and, if necessary, topped up in the event of a decline in paint stripping performance. The control is carried out by titration, in particular by determining the alkalinity.
Take 1 milliliter of bath with a graduated pipette and put it in a flask - flask - beaker
Add about 100 ml of demineralized water;
add 5-6 drops of phenolphthalein indicatorHomogenize the solution
Titrate with 0.1 N hydrochloric acid, stirring, until the color of the solution changes from pink to colorless
The consumption of hydrochloric acid necessary for the color change represents the bathroom score
Applicazione | Concentrazione |
|---|
Alimentation
The minimum bath score should be 17 ml of 0.1 N hydrochloric acid.
If the score is lower, add FIPROSTRIP 299 ADD in a quantity equal to 20 kg of product for each point (ml) of acid missing compared to 17 and for 1000 liters of bath.
The value of a bath in formation is between 18 and 19 points.
Storage
Avoid contact with acids. The materials of the system can be in common iron, avoid contact with galvanized and aluminum.
Highlights
Excellent dissolving capacity towards paints
Possibility of filtering the bathrooms
Low harmfulness for the operator and the environment
Slow evaporation, easy to use and long life
Excellent alternative to solvent products
Application
Stripping of hooks and frames
Recovery of defective parts for subsequent repainting
Removal of protective paints
Prodotti Correlati
UN PO' DI NOI
