top of page

FIPROPLUS 941

COMPLEMENTARY ADDITIVES FOR CHEMICAL PRODUCTS

Technical features

FIPROPLUS 941 is an additive consisting of a mixture of cosolvents, non-ionic and partially cationic surfactants with low foam biodegradable according to law.
It is used to increase the degreasing power of alkaline or acid detergent solutions. It has a very high wetting and solvent power against pollutants that are difficult to eliminate and polymerized oils. Its main function is to decrease the surface tension of the system and thus facilitate the removal of any organic contaminant, such as oils and fats, from the surface of the degreased material.

Bath preparation

The bath is fed in a proportion of 10 ÷ 25% of the degreasing and / or phospho-degreasing product used, depending on the desired results.

​

Parametro
Valore

Storage

Store in covered areas. Recommended use: 12 months from delivery date.

Applicazione
Concentrazione

Highlights

  • Increased degreasing power

  • Sedimentation or flotation of sludge

  • Cabin water treatment

​

​

​

​

Interested?

Write to us!

Privacy

I declare to be at least sixteen, and if less than sixteen, toh ave been authorized by the holder of parental responsabilità, there fore i consent to the processing of my personal data as indicated in the privacy policy.

Comunications

I consent to the processing of my personal data. For newsletters, sms, whatsapp and voice call communications.

Prodotti Correlati

FIPROPLUS 941

Additive based on cosolvents and surfactants used to increase the degreasing power of alkaline or acid solutions. Ideal for difficult oils and dirt.

Scopri i dettagli

FIPROPLUS 949

Additive to increase the alkalinity and the peeling power of alkaline paint strippers for hot and cold use.

Scopri i dettagli

FIPROPLUS 947

Additive with a high content of cosolvents based on surfactants used to increase the degreasing power of alkaline or acid detergent solutions. With low foam, demulsifying.

Scopri i dettagli

FIPROPLUS 948

Liquid additive formulated to increase the cleaning effect of degreasing formulations for immersion use, it favors the removal of organic contaminants, such as oils and fats.

Scopri i dettagli

UN PO' DI NOI

Fusti di stoccaggio

LA NOSTRA PRODUZIONE

Tutte le linee Fiprokim sono prodotte presso la nostra sede di Altavilla Vicentina.

La vasta gamma di miscelatori ed apparecchiature ci permette di avere una notevole potenza produttiva.

FREZZE 4-mod.jpg

PRODOTTI SU MISURA

Fiprokim si avvale di un laboratorio di ricerca e sviluppo formato da tecnici specializzati nei vari settori.

Lo studio delle soluzioni tecniche, la selezione ed il controllo delle materie prime fanno parte del processo di creazione di un prodotto efficace.

immagine azienda ridimensionata.jpg

LA NOSTRA AZIENDA

Fiprokim ha una più che ventennale esperienza nel campo della ricerca, formulazione, produzione e commercializzazione di prodotti chimici per il trattamento dei metalli  e la loro detergenza e di lubrorefrigeranti per la lavorazione meccanica dei metalli.

bottom of page