Technical features
FIPRO SG 592 is an acid liquid product formulated for the degreasing of all metals (including precious metals), preferably in ultrasonic systems.
Usage and Applications
FIPRO SG 592 is used in aqueous solution, by immersion, under the following operating conditions:
Bath temperature: from 45 ° to 80 ° C (in ultrasonic baths from 45 ° to 50 ° C)
Treatment time: from 1 'to 5' (in ultrasonic baths from 30 "to 90")
Bath formation from 10 to 50 g / l (in ultrasonic baths 30 g / l)
Score 6 - 30 ml
Parametro | Valore |
|---|
Control of bathing
Take 50 ml of the bath using a calibrated pipette, place them in a conical flask, dilute them with distilled water and add 5 - 8 drops of green bromcresol indicator. Titrate with 0.1 N caustic soda until the color changes from yellow to blue.
The number of ml of 0.1N caustic soda consumed for the color change gives the score of the FIPRO SG 592 bath.
A bath prepared at 30 g / l has a score of approximately 18.
Applicazione | Concentrazione |
|---|
Alimentation
Feed the bath with FIPRO SG 592 at a rate of 1.8 kg for each missing point and for every 1000 l of bath.
The Fiprokim Technical Service will provide the optimal conditions for use in the start-up phase of the plant, based on the type of contaminant to be removed and the type of plant used.
Storage
All the material that comes into contact with FIPRO SG 592 must be built with antacid material (preferably, AISI 316L stainless steel).
Highlights
Multi-material degreasers
Pre and Post processing treatments
Low environmental impact alternatives
Longevity and effectiveness
Periodic checks
Formulated, produced and controlled internally
Application
Removal of whole and emulsifiable oils, fats and processing pastes
Dephosphating
Removal of polishing pastes from parts and small parts
Removal of interoperational, protective, polymer films and silicones
Etching, pre-painting, pre-conversion treatments
Cleaning of plastics and glass
Interoperational or final cleaning of the product
Prodotti Correlati
UN PO' DI NOI
