Technical specifications
FIPRO SG 590 is an alkaline cleaner for treatment cycles on steel, galvanised steel and aluminium. It is suitable for spray or immersion use.
Usage and Applications
FIPRO SG 590 is used in aqueous solution, by spraying or dipping, under the following conditions:
Treatment time: 2 - 4 minutes
Concentration: 8 - 30 g/l (6.2 - 23.1 ml/l)
Temperature: 50 - 65 °C
Chemical-physical properties
Parametro | Valore |
|---|---|
Appearance | Colourless liquid |
Density | 1.27 |
PH | 10 |
Viscosity (DIN 53211, 4 mm cup, 20 °C) | 12 seconds |
Surface tension (10 g/l, 20 °C) | ~37 mN/m |
Stability | - 7 °C to + 70 °C |
Specific electrical conductivity (10 g/l, 20 °C) | 3.2 mS/cm |
Bathroom control
Take 50 ml sample and pour it into a 250 ml conical flask, add 50 ml demineralised water and 5 drops of green bromocresol indicator.
. Titrate with 0.1 N sulphuric acid (0.05 M) until the colour changes from green to yellow. The ml consumed
correspond to the bath score.
A bath prepared at 20 g/l has a liquor score of 25.2 ml.
Applicazione | Concentrazione |
|---|
Power supply
For every missing point and for every 1000 litres of bath, add 0.8 kg of FIPRO SG 590.
Highlights
Multimaterial Degreasers
Pre- and Post-Processing Treatments
Environmentally friendly alternatives
Longevity and effectiveness
Regular checks
Formulated, produced and controlled in-house
Applications
Removal of whole and emulsifiable oils, fats and pastes
Defosphating
Polishing paste removal from parts and small parts
Removal of inter-operational, protective, polymeric films and silicones
Etinting treatments, pre-painting, pre-conversion
Plastic and glass cleaning
Interoperational or final product cleaning
